Component Function Check

SHIFT POSITION INDICATOR CIRCUIT


Component Function Check

1.CHECK A/T INDICATOR
1. Start the engine.
2. Check the actual selector lever position ("P", "R", "N" and "D") and the indication of the shift position indicator mutually coincide.
3. Drive vehicle in the manual mode, and then check that the actual gear position and the indication of the position indicator mutually coincide when the selector lever is shifted to "UP (+ side)" or "DOWN (- side)" side (1GR - 7GR).
Is the inspection result normal?
YES - INSPECTION END
NO - Go to Diagnosis Procedure.