Removal and Installation

LANE CAMERA UNIT


Removal and Installation


REMOVAL
1. Remove the lane camera cover.
2. Remove the sun-visor holder and front roof finisher. And then disengage front side metal clip of the map lamp assembly. Keep a service area. Exploded View.
3. Remove the bolts.
4. Disconnect lane camera unit connector, and remove lane camera unit.

NOTE:
When replace the lane camera bracket, remove the headlining assembly.

INSTALLATION
Installation is the reverse order of removal.

CAUTION:
- Remove the camera lens cap for replacement.
- Never give an impact to the lane camera unit.
- Perform the camera aiming every time the lane camera unit is removed and installed. Description.