Disassembly

MAIN SHAFT


VK50VE : Disassembly

1. Separate front case and rear case, then remove main shaft assembly. Disassembly.





2. Remove snap ring (1) from main shaft.





3. Remove spacer (1) and steel ball (2) from main shaft.

CAUTION:
Be careful not to drop the steel ball.





4. Using a press, remove electric controlled coupling from main shaft.





5. Remove circlip (1) from notch (A) of electric controlled coupling.

White arrow : Front side

CAUTION:
- Never remove the circlip from the electric controlled coupling rear side.
- Never damage electric control coupling spline, bush, etc.
6. Remove snap ring from main shaft.





7. Remove spacer (1) and steel ball (2) from main shaft.

CAUTION:
Be careful not to drop the steel ball.
8. Remove sprocket from main shaft.
9. Remove needle bearing from main shaft.