Glass Hatch Switch

GLASS HATCH SWITCH


Diagnosis Procedure

Regarding Wiring Diagram information, Power Door Lock System.

NOTE:
Repair any front door lock actuator RH malfunction before proceeding with this diagnosis.
1.CHECK GLASS HATCH SWITCH
1. Turn ignition switch OFF.
2. Insure front door lock actuator RH is in the unlock position.
3. Check continuity between glass hatch switch terminal 2 and ground.










Is the inspection result normal?
YES - GO TO 2.
NO - GO TO 3.
2.CHECK HARNESS CONTINUITY
1. Disconnect glass hatch switch.
2. Disconnect BCM.





3. Check continuity between BCM connector M18 (A) terminal 30 and glass hatch switch connector D706 (B) terminal 2.

30 - 2 : Continuity should exist.

4. Check continuity between BCM connector M18 (A) terminal 30 and ground.

30 - Ground : Continuity should not exist.

Is the inspection result normal?
YES - Glass hatch switch circuit is OK.
NO - Repair or replace harness.
3.CHECK GLASS HATCH SWITCH
1. Disconnect glass hatch switch.





2. Check continuity between glass hatch switch harness connector
D706 terminal 1 and ground.

1 - Ground : Continuity should exist.

Is the inspection result normal?
YES - Replace glass hatch switch.
NO - GO TO 4.
4.CHECK HARNESS CONTINUITY
1. Disconnect front door lock actuator RH.





2. Check continuity between glass hatch switch connector D706
(A) terminal 1 and front door lock actuator RH connector D114
(B) terminal 4

1 - 4 : Continuity should exist.

Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace harness.
5.CHECK FRONT DOOR LOCK ACTUATOR RH GROUND CIRCUIT





Check continuity between front door lock actuator RH connector
D114 terminal 5 and ground

5 - Ground : Continuity should exist.

Is the inspection result normal?
YES - Replace front door lock actuator RH. Removal and Installation.
NO - Repair or replace harness.