Special Repair Requirement

INSPECTION AND ADJUSTMENT


ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement

1. SAVING VEHICLE SPECIFICATION
Perform "READ CONFIGURATION" with CONSULT-III to save or print current vehicle specification.
- GO TO 2
2. REPLACE BCM
Replace BCM. Service and Repair.
- GO TO 3
3. WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" with
CONSULT-III to write vehicle specification. Special Repair Requirement.
- GO TO 4
4. INITIALIZE BCM (NATS)
Perform BCM initialization. (NATS)
- Work End.