Power Seat Cross Beam

THIRD SEAT


Power seat cross beam


REMOVAL





1. Remove the lower seat mount bolts.
2. Fold the seat cushion up.





3. Remove the harness connectors from the seat control unit.





4. Press the front release tab and remove the seat control unit.





5. Remove the two screws from the power seat motor cover assembly.





6. Disconnect the wiring harness from the power seat motor cover clips (A).
7. Remove the power seat motor cover.





8. Release the power motor cross-beam clip and open the hinged strap.





9. Remove the power motor cross-beam screws.





10. Remove the power motor cross-beam.

NOTE:
The cable and conduit will be removed with the cross-beam.
11. Remove the cable and conduit from the cross-beam retainers.

Installation





1. Install the cable into the drive motor and slide the conduit on the motor ferrule.
- Arrow indicates: Vehicle front





2. Install the cable (A) into the RH seat motor.
- Arrow indicates: Vehicle front





3. Install the power motor cross-beam right side screws





4. Starting at the right side, snap the cable and conduit into the power seat cross-beam retainers.





5. Snap the hinged strap retainer around the motor assembly.





6. Replace the power seat motor cover.





7. Install the seat harness to the power seat motor cover clips (A).





8. Install the seat control unit and connect the seat control unit harness connectors.





9. Install the lower seat mount bolts.