Removal and Installation

AIR MIX DOOR MOTOR


Removal and Installation


FRONT AIR MIX DOOR MOTOR (DRIVER)

Removal
1. Remove the front heater and cooling unit assembly. Removal and Installation.
2. Remove the steering member from the front heater and cooling unit assembly.
3. Disconnect the air mix door motor electrical connector.
4. Remove the three screws and remove the air mix door motor.

Installation
Installation is in the reverse order of removal.

FRONT AIR MIX DOOR MOTOR (PASSENGER)

Removal
1. Remove the center console lower cover LH. Removal and Installation.
2. Disconnect the air mix door motor electrical connector.
3. Remove the three screws and remove the air mix door motor.

Installation
Installation is in the reverse order of removal.

REAR AIR MIX DOOR MOTOR

Removal
1. Remove the luggage side lower finisher RH. Luggage Floor Trim.
2. Disconnect the rear air mix door motor electrical connector.
3. Remove the three screws and remove the rear air mix door motor.

Installation
Installation is in the reverse order of removal.