Diagnosis Procedure

WASHER LEVEL SWITCH SIGNAL CIRCUIT


Description

Transmits the washer level switch signal to the combination meter.




WASHER LEVEL SWITCH SIGNAL CIRCUIT


Diagnosis Procedure

Regarding Wiring Diagram information, Combination Meter.
1.CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect combination meter connector and washer fluid level switch connector.
3. Check continuity between combination meter harness connector
M24 (A) terminal 23 and washer fluid level switch harness connector E106 (B) terminal 1.

23 - 1 : Continuity should exist.

4. Check continuity between combination meter harness connector
M24 (A) terminal 23 and ground.

23 - Ground : Continuity should not exist.

Is the inspection result normal?
YES - GO TO 2
NO - Repair harness or connector.
2.CHECK WASHER FLUID LEVEL SWITCH GROUND CIRCUIT





Check continuity between washer fluid level switch harness connector E106 terminal 2 and ground.

2 - Ground : Continuity should exist.

Is the inspection result normal?
YES - Inspection End.
NO - Repair harness or connector.