Courtesy Lamp: Service and Repair

INTERIOR ROOM LAMP


Removal and Installation


MAP LAMP

Removal





1. Remove overhead console (3). Service and Repair.
2. Disconnect connectors (4) and remove the map lamp screws
(1), then remove map lamp (2) from overhead console.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Using a suitable tool (A), remove map lamp lens (1).





: Pawl
2. Release one side of the bulb (2) from the tab, then pull straight downward to remove.

Map lamp bulb : 12V - 8W


CAUTION:
Wrap a cloth around tool to protect the housing and lens.

VANITY MIRROR LAMP

Removal
The vanity mirror lamp is replaced as part of the sunvisor assembly. Service and Repair.

Installation
Installation is in the reverse order of removal.

Bulb Replacement





1. Using a suitable tool (A), release the tabs and remove the vanity mirror lamp lens (1).
: Pawl
2. Release one side of the bulb (2) from the tab, then pull straight out to remove.

Vanity mirror lamp bulb : 12V - 1.8W


CAUTION:
Wrap a cloth around tool to protect the housing and lens.

GLOVE BOX LAMP

Removal
1. Remove instrument lower panel RH and glove box. Removal and Installation.
2. Rotate glove box lamp socket and rotate counterclockwise to release from steering member.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove instrument lower panel RH and glove box. Removal and Installation.





2. Pull bulb (2) straight out from glove box lamp socket (1) to remove.

Glove box lamp bulb : 12V - 3.4W


STEP LAMP

Removal










1. Insert a suitable tool between door finisher and step lamp lens/socket to release the pawls.
2. Disconnect the step lamp connector, then remove step lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove the step lamp lens/socket.
2. Pull the bulb straight out to remove.

Step lamp bulb : 12V - 3.8W


PERSONAL LAMP (if equipped)

Removal





1. Remove overhead console. Service and Repair.
2. Remove personal lamp screws (3).
3. Disconnect personal lamp electrical connectors (1), then remove personal lamps (2) from overhead console.

Installation
Installation is in the reverse order of removal.

Bulb Replacement





1. Using a suitable tool (A), release the pawls and remove personal lamp lens (1).
: Pawl
2. Pull bulb (2) straight out to remove.

Personal lamp bulb : 12V - 6W


CAUTION:
Wrap a cloth around tool to protect the housing and lens.

FOOTWELL LAMP

Removal





Rotate footwell lamp socket (3) counterclockwise from bracket.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Release the pawls and remove bulb shield from bracket (1).
2. Pull bulb (2) straight out from footwell lamp socket (3) to remove.

Footwell lamp bulb : 12V - 3.4W