Auxiliary Power Outlet: Service and Repair

POWER SOCKET


Removal and Installation


REMOVAL
1. Access both front and back of power socket assembly. Exploded View (Cluster Lid C) IP-20, "Exploded View" (Front Center Console), or Luggage Floor Trim (Rear Luggage
Floor Trim).





2. Remove inner socket (1) from the ring (2) while pressing the hook (B) on the ring out from square hole (A).
3. Disconnect power socket connector.
4. Remove ring from power socket finisher while pressing pawls.

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
Align notches of inner socket and ring, and socket finisher when installing.