Component Inspection

WASHER SWITCH


Component Inspection

1. CHECK FRONT WASHER SWITCH





1. Turn the ignition switch OFF.
2. Disconnect combination switch.
3. Check continuity between the combination switch terminals.





Does continuity exist?
YES - GO TO 2.
NO - Replace combination switch. Service and Repair.
2. CHECK REAR WASHER SWITCH





1. Turn the ignition switch OFF.
2. Disconnect combination switch.
3. Check continuity between the combination switch terminals.





Does continuity exist?
YES - Wiper and washer switch is normal.
NO - Replace combination switch. Service and Repair.