LDP TCM Cam CAN Cir2

U0101 LDP) TCM CAM CAN CIR2





DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.DTC ERASE
Erase the DTC memory of ABS actuator and electric unit (control unit) with CONSULT-III.
- GO TO 2.
2.DTC CONFIRMATION
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Perform the self-diagnosis of ABS actuator and electric unit (control unit) with CONSULT-III.
Is the DTC "U0101" detected?
YES - SEE Diagnosis Procedure.
NO - Intermittent Incident.




Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS OF TCM
Perform self-diagnosis of TCM with CONSULT-III.
Is any DTC detected?
YES - GO TO 2.
NO - GO TO 4.
2.TCM TROUBLE DIAGNOSIS
Perform trouble diagnosis of TCM. Testing and Inspection.
- GO TO 3.
3.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U0101" erased?
YES - INSPECTION END
NO - Replace ABS actuator and electric unit (control unit).
4.PROVISIONAL REPLACEMENT OF TCM
Remove TCM. Install a normal TCM.
- GO TO 5.
5.ERASE DTC
Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT-III.
Is the DTC "U0101" erased?
YES - Replace TCM.
NO - Replace ABS actuator and electric unit (control unit).