BSW

U1010 CONTROL UNIT (CAN)





SIDE RADAR LH : Description
CAN controller controls the communication of BSW communication signal and the error detection.




SIDE RADAR LH : DTC Logic

DTC DETECTION LOGIC









SIDE RADAR LH : Diagnosis Procedure
1.CHECK SELF-DIAGNOSIS RESULT
1. Turn the BSW system ON.
2. Perform "All DTC Reading" with CONSULT-III.
3. Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "SIDE RADAR
LEFT".
Is "U1010" detected as the current malfunction?
YES - Replace the side radar LH. Side Radar.
NO - INSPECTION END




SIDE RADAR RH : Description
CAN controller controls the communication of BSW communication signal and the error detection.




SIDE RADAR RH : DTC Logic

DTC DETECTION LOGIC









SIDE RADAR RH : Diagnosis Procedure
1.CHECK SELF-DIAGNOSIS RESULT
1. Turn the BSW system ON.
2. Perform "All DTC Reading" with CONSULT-III.
3. Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "SIDE RADAR
RIGHT".
Is "U1010" detected as the current malfunction?
YES - Replace the side radar RH. Side Radar.
NO - INSPECTION END




BSW CONTROL MODULE : Description
CAN controller controls the communication of CAN communication signal and BSW communication signal, and the error detection.




BSW CONTROL MODULE : DTC Logic

DTC DETECTION LOGIC









BSW CONTROL MODULE : Diagnosis Procedure
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Turn the BSW system ON.
2. Perform "All DTC Reading" with CONSULT-III.
3. Check if the "U1010" is detected as the current malfunction in "Self Diagnostic Result" of "BSW".
Is "U1010" detected as the current malfunction?
YES - Replace the BSW control module. Service and Repair.
NO - INSPECTION END