Removal and Installation Intelligent Key System

BACK DOOR


BACK DOOR STAY : Removal and Installation


REMOVAL
1. Support back door lock with the proper material to prevent it from falling.

WARNING:
Body injury may occur if no supporting rod is holding the back door open when removing the back door stay.
2. Remove mounting bolts of back door stay (body side).





3. Remove the metal clip (3) located on the connection between the back door stay (1) and the stud ball (2) (back door side) by using a flatted-blade screwdriver (A).
4. Remove back door stay (back door side).
5. Remove mounting bolts of stud ball assembly, and then remove stud ball assembly.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Check back door open/close operation after installation.