Rear Suspension Member Inspection

REAR SUSPENSION MEMBER


Inspection


INSPECTION AFTER REMOVAL
Check rear suspension member for deformation, cracks, or any other damage. Replace if necessary.

INSPECTION AFTER INSTALLATION
1. Adjust parking brake operation (stroke). Component Tests and General Diagnostics.
2. Check wheel alignment. Rear Suspension Wheel Alignment Inspection.
3. Adjust neutral position of height sensor (with xenon head lamp). Additional Service When Replacing Control Unit (AFS Control Unit) Additional Service When Replacing Control Unit (AFS Control U Additional Service When Replacing Control Unit (AFS Control Unit) Description Xenon Type Special Repair Requirement Xenon Type Description Xenon Type Special Repair Requirement Xenon Type, "ADDITIONAL SERVICE
WHEN REPLACING CONTROL UNIT (HEIGHT SENSOR) : Special Repair Requirement".
4. Adjust neutral position of steering angle sensor. Description Special Repair Requirement Description Special Repair Requirement, "ADJUSTMENT OF STEERING ANGLE
SENSOR NEUTRAL POSITION : Special Repair Requirement".