Removal and Installation Intelligent Key System
RADIATOR CORE SUPPORT
Removal and Installation
REMOVAL
1. Use a refrigerant collecting equipment to discharge the refrigerant. Service and Repair, "Collection and
Charge".
2. Drain engine coolant from radiator. Draining Engine Coolant.
3. Remove engine under cover. Removal And Installation.
4. Remove front grille. Removal And Installation.
5. Remove front bumper fascia, energy absorber, reinforcement. Removal And Installation, "Removal and Installa-
tion".
6. Remove mounting bolts of hood lock cover.
7. Disconnect harness clip and hood lock cable from hood lock cover.
8. Remove hood lock cover.
9. Remove front combination lamp (LH/RH). Removal And Installation Xenon Type (XENON TYPE) or Removal And Installation Halogen Type (HALOGEN TYPE).
10. Disconnect hood lock switch connector (A) from head lamp bracket (RH) (1).
11. Remove mounting bolts and remove hood lock bracket (2) (LH/RH).
Black Arrow :Bolt
12. Disconnect hood lock cable from hood lock (LH/RH).
13. Disassembly hood lock from hood lock bracket (LH/RH).
14. Disconnect all clamp of hood cable from radiator core support assembly.
15. Disconnect harness connector of refrigerant pressure sensor. Exploded View Removal And Installation, "Removal and Installa-
tion".
16. Disconnect harness connector of ambient sensor. Removal And Installation.
17. Remove air guide (LH).
18. Remove ICC sensor integrated unit (with intelligent cruse control model). ICC (Full Speed Range) ICC (Full Speed Range), "Removal
and Installation".
19. Remove horn (Hi/Lo). Removal And Installation.
20. Remove intelligent key warning buzzer. Removal And Installation.
21. Disconnect harness clamp from hood lock stay.
22. Remove mounting bolt and nut, and remove hood lock stay.
23. Remove washer tank. Removal And Installation.
24. Remove power steering oil cooler. (2WD) or Service and Repair, "AWD :
Exploded View" (AWD).
25. Remove air guide (RH).
26. Remove mounting bolt of power steering oil cooler pipe bracket.
(2WD) or Service and Repair (AWD).
27. Remove air cleaner box (LH/RH). Removal And Installation.
28. Remove front under side cover (LH). Removal And Installation.
29. Remove radiator upper hose and lower hose at radiator side. Removal and Installation.
30. Remove mounting bolts of condenser assembly from radiator core support assembly. Exploded View Removal And Installation, "CONDENSER : Removal and Installation".
31. Disconnect AT fluid cooler hose (upper/lower) from fan shroud and remove AT fluid cooler hose (upper/lower) from radiator. Removal And Installation (2WD) or Removal And Installation (AWD).
32. Remove condenser assembly. Removal And Installation.
33. Remove radiator. Removal and Installation.
34. Disconnect harness connector of crash zone sensor. Removal And Installation.
35. Disconnect harness connector of cooling fan control module. Removal and Installation.
36. Disconnect all harness clip from radiator core support assembly.
37. Remove mounting bolts, and then remove radiator core support assembly.
CAUTION:
Operate with two workers, because of its heavy weight.
38. Remove the following parts after removing radiator core support assembly.
- Head lamp bracket
- Cooling fan (LH/RH): Removal and Installation.
- Crash zone sensor: Removal And Installation.
- Ambient sensor: Removal And Installation.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
- Replenish the following parts.
- Refrigerant: Service and Repair.
- Engine coolant: Refilling Engine Coolant.
- AT fluid: Changing.
- Power steering oil: Service and Repair.
- Adjust the following parts.
- ICC sensor integrated unit (with intelligent cruse control model): Aiming Adjustment Procedure" (HALOGEN TYPE).
- Around view monitor (BOSE AUDIO WITH NAVIGATION): Bose Audio Without Navigation Bose Audio Without Navigation Description Special Repair Requirement, "CALIBRATING CAMERA
IMAGE (AROUND VIEW MONITOR) : Special Repair Requirement"