RH

REAR SEATBACK SWITCH:_:RH





Description
Switch that performs the return operation or release operation.




Component Function Check
1.CHECK FUNCTION
Check that the rear seatback (RH) rises when pressing and holding the rear seatback switch (RH) in UP direction.
Is the inspection result normal?
YES - Rear seatback switch (RH) is OK.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK REAR SEATBACK POWER RETURN CONTROL UNIT INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect rear seatback switch (RH) connector.
3. Check voltage between rear seatback switch (RH) harness connector and ground.





Is the inspection result normal?
YES - GO TO 3.
NO - GO TO 2.
2.CHECK REAR SEATBACK SWITCH (RH) CIRCUIT
1. Disconnect rear seatback power return control unit connector.
2. Check continuity between rear seatback power return control unit harness connector and rear seatback switch (RH) harness connector.





3. Check continuity between rear seatback power return control unit harness connector and ground.





Is the inspection result normal?
YES - Replace rear seatback power return control unit. Removal And Installation.
NO - Repair or replace harness.
3.CHECK REAR SEATBACK SWITCH (RH) GROUND CIRCUIT
Check continuity rear seatback switch (RH) harness connector and ground.





Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace harness.
4.CHECK REAR SEATBACK SWITCH (RH)
Check rear seatback switch (RH). SEE Component Inspection.
Is the inspection result normal?
YES - GO TO 5.
NO - Replace rear seatback switch (RH). Removal And Installation.
5.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END




Component Inspection
1.CHECK REAR SEATBACK SWITCH (RH)
1. Turn ignition switch OFF.
2. Disconnect rear seatback switch (RH) connector.
3. Check rear seatback switch (RH) terminals.





Is the inspection result normal?
YES - Rear seatback switch (RH) is OK.
NO - Replace rear seatback switch (RH). Removal And Installation.