BSW

C1A01 POWER SUPPLY CIRCUIT 1, C1A02 POWER SUPPLY CIRCUIT 2





DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.PERFORM DTC CONFIRMATION PROCEDURE
1. Start the engine.
2. Turn the BSW system ON.
3. Perform "All DTC Reading" with CONSULT-III.
4. Check if the "C1A01" or "C1A02" is detected as the current malfunction in "Self Diagnostic Result" of "BSW".
Is "C1A01" or "C1A02" detected as the current malfunction?
YES - SEE Diagnosis Procedure.
NO - Intermittent Incident.




Diagnosis Procedure
1.CHECK BSW CONTROL MODULE POWER SUPPLY AND GROUND CIRCUIT
Check power supply and ground circuit of BSW control module. BSW Control Module.
Is the inspection result normal?
YES - Replace the BSW control module. Service and Repair.
NO - Repair or replace the malfunctioning parts.