Hazard And Buzzer Reminder Does Not Operate

HAZARD AND BUZZER REMINDER DOES NOT OPERATE





Description

NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Work Flow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
- Intelligent Key is removed from key slot.
- Ignition switch is in OFF position.
- No Intelligent Keys are inside the vehicle.




Diagnosis Procedure
1.CHECK "HAZARD ANSWER BACK" SETTING IN "WORK SUPPORT"
Check "HAZARD ANSWER BACK" setting in "WORK SUPPORT". Consult-III Function.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "HAZARD ANSWER BACK" in "WORK SUPPORT".
2.CHECK "ANS BACK I-KEY LOCK" SETTING IN "WORK SUPPORT"
Check "ANS BACK I-KEY LOCK" setting in "WORK SUPPORT". Consult-III Function.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "ANS BACK I-KEY LOCK" in "WORK SUPPORT".
3.CHECK "ANS BACK I-KEY UNLOCK" SETTING IN "WORK SUPPORT"
Check "ANS BACK I-KEY UNLOCK" setting in "WORK SUPPORT". Consult-III Function.
Is the inspection result normal?
YES - GO TO 4.
NO - Set "ANS BACK I-KEY UNLOCK" in "WORK SUPPORT".
4.CHECK HAZARD WARNING LAMP
Check hazard warning lamp. Hazard Function.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer. Intelligent Key Warning Buzzer.
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.