Axle Nut

Rear Wheel Hub Lock Nut 100 - 105 N-m (10.2 - 10.7 kg-m, 74 - 77 ft-lb) Removal And Installation

NOTE:
Wheel hub lock nut tightening torque does not over torque for avoiding axle noise, and does not less than torque for avoiding looseness.
Perform the final tightening of each of parts under unladen conditions, which were removed when removing wheel hub and bearing assembly and axle housing.
When installing the spring washer, face the identification paint mark to the wheel hub and bearing assembly side.
When installing the adjusting cap, check that there must be no play.
Never reuse cotter pin, wheel hub lock nut, spring washer, and bushing.