Operation CHARM: Car repair manuals for everyone.

Assembly





HIGH AND LOW REVERSE CLUTCH


Assembly






1. Install high and low reverse clutch drive plates, high and low reverse clutch driven plates, and high and low reverse clutch retaining plate in high and low reverse clutch drum. (Type 1)

1 : Snap ring
2 : Retaining plate
3 : Drive plate (four pieces)
4 : Driven plate (four pieces)


CAUTION:
Check the order of plates.





2. Install high and low reverse clutch dish plate, high and low reverse clutch drive plates, high and low reverse clutch driven plates, and high and low reverse clutch retaining plate in high and low reverse clutch drum. (Type 2)

1 : Snap ring
2 : Retaining plate
3 : Drive plate (four pieces)
4 : Driven plate (four pieces)
5 : Dish plate


CAUTION:
Check the order of plates.





3. Install snap ring in high and low reverse clutch drum using a flat-bladed screwdriver.

CAUTION:
- Be careful not to scratch high and low reverse clutch drum.
- Be careful not to damage snap ring.





4. Install bearing race to high and low reverse clutch drum.

CAUTION:
Check the direction of needle bearing. Oil Channel Location Of Needle Bearings And Bearing Races, "Location of Needle Bearings and Bearing Races".