Removal And Installation With Automatic Back Door

BACK DOOR


BACK DOOR HINGE : Removal and Installation


REMOVAL
1. Remove luggage side lower finisher and luggage side upper finisher. Removal And Installation.
2. Using a remover tool, remove headlining clip at the rear side of headlining, and then remove rear side of headlining. Removal And Installation.
3. Remove back door assembly. Removal And Installation With Automatic Back Door.
4. Remove back door hinge mounting nuts (body side), and then remove back door hinge.

INSTALLATION
Note the following items, and then install in the reverse order of removal.

CAUTION:
- After installation, perform the fitting adjustment. With Automatic Back Door.
- Perform initialization setting of automatic back door system. Work Procedure With Automatic Back Door.
- After installation, check back door open/close, lock/unlock operation.
- Check back door hinge rotating part for poor lubrication. If necessary, apply body grease.
- After installation, perform the camera image calibration. Navigation (Single Monitor) Navigation (Single Monitor) Navigation (Single Monitor) Navigation (Single Monitor), "CALIBRATING CAMERA
Navigation (Twin Monitor) Navigation (Twin Monitor) Navigation (Twin Monitor) Navigation (Twin Monitor), "CALIBRATING
CAMERA IMAGE (AROUND VIEW MONITOR) : Work Procedure" (twin monitor).