Key Reminder Function Does Not Operate Without Automatic Back Door

KEY REMINDER FUNCTION DOES NOT OPERATE





Description

NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Work Flow Without Automatic Back Door.
- Understand the operation when does it work, System Description Without Automatic Back Door.




Diagnosis Procedure
1.CHECK "ANTI KEY LOCK IN FUNCTI" SETTING IN "WORK SUPPORT"
Check "ANTI KEY LOCK IN FUNCTI" setting in "WORK SUPPORT". CONSULT-III Function (BCM - Intelligent Key) Without Automatic Back Door.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "ANTI KEY LOCK IN FUNCTI" setting in "WORK SUPPORT".
2.CHECK DOOR SWITCH
Check door switch. Door Switch Without Automatic Back Door.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK INSIDE KEY ANTENNA
Check inside key antenna. Inside Key Antenna 1 Without Automatic Back Door (instrument center). Inside Key Antenna 2 Without Automatic Back Door (console). Inside Key Antenna 3 Without Automatic Back Door (luggage room).
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK UNLOCK SENSOR
Check unlock sensor. Unlock Sensor Without Automatic Back Door.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.