Push-Button Ignition Switch Operation With Automatic Back Door

TAKE AWAY WARNING DOES NOT OPERATE:_:PUSH-BUTTON IGNITION SWITCH OPERATION





Diagnosis Procedure
1.CHECK POWER POSITION
Check if ignition switch position is changing or not.
Does ignition switch position change?
YES - GO TO 2.
NO - Check DTC for BCM. Testing and Inspection.
2.CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch. Push-Button Ignition Switch.
Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace the malfunctioning parts.
3.CHECK BUZZER (COMBINATION METER)
Check buzzer (combination meter). With Automatic Back Door Closer.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK COMBINATION METER DISPLAY
Check combination meter display. Combination Meter Display Function With Automatic Back Door.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CHECK INSIDE KEY ANTENNA
Check inside key antenna. Inside Key Antenna 1 With Automatic Back Door (instrument center). Inside Key Antenna 2 With Automatic Back Door (console). Inside Key Antenna 3 With Automatic Back Door (luggage room).
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Intermittent Incident.
NO - GO TO 1.