Front Window Anti-Pinch

POWER WINDOW MOTOR:_:DRIVER SIDE





Description
Door glass moves UP/DOWN by receiving the signal from power window main switch.




Component Function Check
1.CHECK POWER WINDOW MOTOR CIRCUIT
Check front power window motor (driver side) operation with power window main switch.
Is the inspection result normal?
YES - Front power window motor (driver side) is OK.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK FRONT POWER WINDOW MOTOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect front power window motor (driver side) connector.
3. Turn ignition switch ON.
4. Check voltage between front power window motor (driver side) harness connector and ground.





Is the inspection result normal?
YES - GO TO 2.
NO - GO TO 3.
2.CHECK POWER WINDOW MOTOR
Check front power window motor (driver side). SEE Component Inspection.
Is the inspection result normal?
YES - GO TO 4.
NO - Replace front power window motor (driver side). Removal And Installation.
3.CHECK POWER WINDOW MOTOR CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect power window main switch connector.
3. Check continuity between power window main switch harness connector and front power window motor
(driver side) harness connector.





4. Check continuity between power window main switch harness connector and ground.





Is the inspection result normal?
YES - Replace power window main switch. Front Window Anti-Pinch.
NO - Repair or replace harness.
4.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END




Component Inspection

COMPONENT INSPECTION
1.CHECK POWER WINDOW MOTOR
1. Turn ignition switch OFF.
2. Disconnect front power window motor (driver side) connector.
3. Check motor operation by connecting the battery voltage directly to front power window motor (driver side) connector.





Is the inspection result normal?
YES - Front power window motor (driver side) is OK.
NO - Replace front power window motor (driver side). Removal And Installation.