Trip A/B Reset Switch Signal Circuit

TRIP A/B RESET SWITCH SIGNAL CIRCUIT





Description
Transmits the trip A/B reset switch signals to the combination meter.




Diagnosis Procedure
1.CHECK TRIP A/B RESET SWITCH INPUT SIGNAL
1. Turn the ignition switch ON.
2. Check voltage between the combination meter harness connector terminals.





Is the inspection result normal?
YES - INSPECTION END
NO - GO TO 2.
2.CHECK TRIP A/B RESET SWITCH SIGNAL CIRCUIT
1. Turn the ignition switch OFF.
2. Disconnect the combination meter and meter control switch connectors.
3. Check continuity between combination meter harness connector and trip A/B reset switch harness connector.





4. Check continuity between combination meter harness connector and ground.





Is the inspection result normal?
YES - INSPECTION END
NO - Repair harness or connector.




Component Inspection
1.CHECK TRIP A/B RESET SWITCH UNIT
1. Turn the ignition switch OFF.
2. Disconnect the trip A/B reset switch connector.
3. Check continuity between the trip A/B reset switch connector terminals.





Is inspection result normal?
YES - INSPECTION END
NO - Replace the trip A/B reset switch.