Rear RH

ENCODER:_:REAR RH





Description
Detects condition of the rear power window motor RH operation and transmits to rear power window switch
RH as the pulse signal.




Component Function Check
1.CHECK ENCODER OPERATION
Check that rear door RH glass performs AUTO open/close operation normally by power window main switch or rear power window switch RH.
Is the inspection result normal?
YES - Encoder operation is OK.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK ENCODER SIGNAL
1. Turn ignition switch ON.
2. Check signal between rear power window switch RH harness connector and ground with oscilloscope.










Is the inspection result normal?
YES - Replace rear power window switch RH. Rear Power Window Switch.
NO - GO TO 2.
2.CHECK ENCODER SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rear power window switch RH connector and rear power window motor RH connector.
3. Check continuity between rear power window switch RH harness connector and rear power window motor
RH harness connector.





4. Check continuity rear power window switch RH harness connector and ground.





Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace harness.
3.CHECK ENCODER POWER SUPPLY CIRCUIT 1
1. Connect rear power window switch RH connector.
2. Turn ignition switch ON.
3. Check voltage between rear power window motor RH harness connector and ground.





Is the inspection result normal?
YES - GO TO 4.
NO - GO TO 5.
4.CHECK GROUND CIRCUIT 1
1. Turn ignition switch OFF.
2. Check continuity between rear power window motor RH harness connector and ground.





Is the inspection result normal?
YES - Replace rear power window motor RH. Removal And Installation.
NO - GO TO 6.
5.CHECK ENCODER POWER SUPPLY CIRCUIT 2
1. Turn ignition switch OFF.
2. Disconnect rear power window switch RH connector.
3. Check continuity between rear power window switch RH harness connector and rear power window motor
RH harness connector.





4. Check continuity between rear power window switch RH harness connector and ground.





Is the inspection result normal?
YES - Replace rear power window switch RH. Rear Power Window Switch.
NO - Repair or replace harness.
6.CHECK GROUND CIRCUIT 2
1. Disconnect rear power window switch RH harness connector.
2. Check continuity between rear power window switch RH harness connector and rear power window motor
RH harness connector.





Is the inspection result normal?
YES - Replace rear power window switch RH. Rear Power Window Switch.
NO - Repair or replace harness.