RH With Automatic Back Door

SPINDLE MOTOR:_:RH





Diagnosis Procedure
1.CHECK SPINDLE MOTOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect spindle unit RH connector.
3. Check voltage between spindle unit RH harness connector and ground.





Is the inspection result normal?
YES - Replace spindle unit RH.
NO - GO TO 2.
2.CHECK SPINDLE MOTOR CIRCUIT
1. Disconnect automatic back door control unit connector.
2. Check continuity between automatic back door control unit harness connector and spindle unit harness connector.





3. Check continuity between automatic back door control unit harness connector and ground.





Is the inspection result normal?
YES - Replace automatic back door control unit. Removal And Installation.
NO - Repair or replace harness.