B2463

B2463 ROLLOVER SIGNAL





Description
Inputs the rollover signal from air bag diagnosis sensor unit via CAN communication.




DTC Logic

DTC DETECTION LOGIC

NOTE:
If DTC B2463 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Suspension Control.






DTC CONFIRMATION PROCEDURE
1.SELF-DIAGNOSIS WITH PRE-CRASH SEAT BELT CONTROL UNIT
1. Turn ignition switch ON.
2. Check "Self-diagnostic result" with CONSULT-III.
Is DTC detected?
YES - SEE Diagnosis Procedure.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK DTC WITH AIR BAG DIAGNOSIS SENSOR UNIT
Check "self-diagnostic result" for "AIR BAG DIAGNOSIS SENSOR UNIT" with CONSULT-III. Diagnosis System (Air Bag).
Is the inspection result normal?
YES - GO TO 2.
NO - Replace air bag diagnosis sensor unit. Removal And Installation.
2.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END