C118E

C118E ACCUMULATOR





DTC Logic

DTC DETECTION LOGIC

CAUTION:
The VDC warning lamp, ABS warning lamp and brake warning lamp turns ON and DTC "C118E" may be detected in self-diagnosis result of "ABS" when the brake pedal is excessively operated, such as air bleeding. This is not a system malfunction because this occurs due to the temporary decrease in accumulator fluid pressure. The system returns to normal condition when the accumulator fluid pressure reaches the specified pressure with the ignition switch ON and the VDC warning lamp, ABS warning lamp, and brake warning lamp turn OFF. After these steps, ABS self-diagnosis results are erased.









Diagnosis Procedure
1.ERASE SELF-DIAGNOSIS RESULT

CAUTION:
The VDC warning lamp, ABS warning lamp and brake warning lamp turns ON and DTC "C118E" may be detected in self-diagnosis result of "ABS" when the brake pedal is excessively operated, such as air bleeding. This is not a system malfunction because this occurs due to the temporary decrease in accumulator fluid pressure. The system returns to normal condition when the accumulator fluid pressure reaches the specified pressure with the ignition switch ON and the VDC warning lamp, ABS warning lamp, and brake warning lamp turn OFF. After these steps, ABS self-diagnosis results are erased.
With CONSULT-III.
1. Erase Self-diagnosis result for "ABS".
2. Turn the ignition switch OFF.
3. Depress brake pedal to full stroke 20 times or more.
4. Start the engine, and then wait 2 minutes or more.
5. Check VDC warning lamp, ABS warning lamp and brake warning lamp turns OFF.
6. Perform self-diagnosis for "ABS".
Is any DTC detected?
YES - Check the DTC. Testing and Inspection.
NO - INSPECTION END