C1805

C1805 VHCL HEIGHT ADJ DOWN





DTC Logic

DTC DETECTION LOGIC






DTC CONFIRMATION PROCEDURE
1.PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.
- GO TO 2.
2.CHECK DTC DETECTION
With CONSULT-III
1. Start the engine and wait 150 seconds or more.
2. Perform "Self Diagnostic Result" in "E-SUS".
Is "C1805" detected ?
YES - Go to SEE Diagnosis Procedure.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK APPEARANCE
Visually check for malfunction of suspension components, crush of air tube, installation malfunction, or deformation of vehicle height sensor.
Is the inspection result normal?
YES - GO TO 2.
NO - Repair or replace damaged parts.
2.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
Is the inspection result normal?
YES - Perform "STANDARD VEHICLE HEIGHT SETTING". Work Procedure.
NO - Repair or replace damaged part.