Rear Suspension Member Inspection

REAR SUSPENSION MEMBER


Inspection and Adjustment


INSPECTION AFTER REMOVAL
Check rear suspension member for deformation, cracks, or any other damage. Replace if necessary.

INSPECTION AFTER INSTALLATION
1. Adjust parking brake operation (stroke). Inspection.
2. Check wheel alignment. Wheel Alignment Inspection.
3. Adjust neutral position of steering angle sensor. Work Procedure.
4. Adjust levelizer adjustment of height sensor. Special Repair Requirement Xenon Type.
5. Check standard vehicle height setting of vehicle height sensor. Work Procedure.
6. Check wheel sensor harness for proper connection. Exploded View

ADJUSTMENT AFTER INSTALLATION (WITH HBMC)
Bleed air from the HBMC. Air Bleeding Method.