Work Procedure

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT


BCM : Work Procedure

1.SAVING VEHICLE SPECIFICATION
CONSULT-III Configuration
Perform "READ CONFIGURATION" to save or print current vehicle specification. .

NOTE:
If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing BCM.
- GO TO 2.
2.REPLACE BCM
Replace BCM. Service and Repair.
- GO TO 3.
3.WRITING VEHICLE SPECIFICATION
CONSULT-III Configuration
Perform "WRITE CONFIGURATION - Config file" or "WRITE CONFIGURATION - Manual selection" to write vehicle specification. Configuration List.
- GO TO 4.
4.INITIALIZE BCM (NATS)
Perform BCM initialization. (NATS)
- WORK END