System Description

SYSTEM


DOOR MIRROR SYSTEM : System Description


MANUAL FUNCTION

Description
- Automatic drive positioner control unit controls door mirror.
- Automatic drive positioner control unit inputs changeover switch signal and perform the LH/RH control of door mirror motor supplying electric power when changeover switch is operated.
- Automatic drive positioner control unit inputs mirror switch signal and supplies electric power to door mirror.
- The ignition switch signal (ACC/ON) is transmitted from BCM to driver seat control unit via CAN communication and from driver seat control unit to automatic drive positioner control unit via UART communication.

Operation Conditions
If the following conditions are not satisfied, operation is not performed.
- Ignition switch: ON or ACC
- Changeover switch: Select either left or right

REVERSE INTERLOCK DOOR MIRROR SYSTEM

Description
- Select either of the door mirror faces by changeover switch, and then set mirror face downward.
- When ignition switch is ON position and A/T shift selector is in R position, TCM sends the R signal to driver seat control unit.
- The R signal is transmitted to automatic drive positioner control unit from driver seat control unit via UART communication.
- When the R signal is detected, automatic drive positioner control unit activated mirror motor.

Operation Conditions
If the following conditions are not satisfied, operation is not performed.
- Ignition switch: ON
- Changeover switch: Select either left or right
- A/T shift selector: R position

NOTE:
During the reverse interlock door mirror system, if all of the above conditions are not satisfied, mirror face returns to original angle.