Removal And Installation

INSIDE MIRROR


Removal and Installation


WITH RAIN SENSOR MODELS

Removal
1. Disengage rain sensor cover fixing pawls with a remover tool to remove.
2. Disconnect harness connector from inside mirror.
3. Loosen TORX bolt and slide inside mirror upward to remove.

Installation
Install in the reverse order of removal.

WITHOUT RAIN SENSOR MODELS

Removal
1. Remove inside mirror cover.
2. Disconnect harness connector from inside mirror.
3. Loosen TORX bolt and slide inside mirror upward to remove.

Installation
Install in the reverse order of removal.