Headrest (With Headrest Display Only)

FRONT SEAT


HEADREST (WITH HEADREST DISPLAY ONLY) HEADREST (WITH HEADREST DISPLAY ONLY) : Disassembly and Assembly


DISASSEMBLY

CAUTION:
- Never strongly press panel surface of display (glass area).
- Never strongly press or pull out the movable part of display.





1. Remove the headrest trim retainer (A).





2. Remove the headrest display harness and upper tube fixing screws (A), and then remove headrest display unit mounting bolts (B).
3. Remove the headrest display escutcheon and headrest display.





1. Insert a remover tool (A) between lower side of headrest display escutcheon (1) and headrest trim (2) and pull out lower side of escutcheon.





2. Pull out headrest display escutcheon (1) to the position that pawl is visible and disengage pawl.

Triangle: Pawl

3. Pull out lower side of headrest display escutcheon from headrest.

CAUTION:
Be careful not to damage pawls on upper side headrest display escutcheon since pawl are not fixed yet.





4. Pull downward and remove headrest display escutcheon (1) and headrest display unit (2) by pulling them out and removing pins on upper side of display.
5. Disconnect inner harness connector.
6. Remove headrest display escutcheon from headrest display unit.
Press headrest display escutcheon to the headrest display unit side. Disconnect pawls on upper side and remove headrest display escutcheon.
4. Remove the headrest display harness upper tube from headrest trim.
5. Remove the headrest trim from headrest pad and frame.

ASSEMBLY
Assembly in the reverse order of disassembly.