Consult-III Function (ICC/ADAS)

DIAGNOSIS SYSTEM (ADAS CONTROL UNIT)


CONSULT-III Function (ICC/ADAS)


APPLICATION ITEMS
CONSULT-III performs the following functions via CAN communication using ADAS control unit.






WORK SUPPORT






NOTE:
- Causes of the maximum five cancellations (system cancel) are displayed.
- The displayed cancellation causes display the number of the ignition switch ON/OFF up to 254. It is fixed to 254 if it is over 254. It returns to 0 when the same cancellation cause is detected again.

Display Items for The Cause of Automatic Cancellation 1











Display Items for The Cause of Automatic Cancellation 2






SELF DIAGNOSTIC RESULT
Testing and Inspection.

DATA MONITOR





















ACTIVE TEST

CAUTION:
- Never perform "Active Test" while driving the vehicle.
- The "Active Test" cannot be performed when the following systems warning lamp is illuminated.
- ICC system warning lamp
- Lane departure warning lamp
- BSW warning lamp
- IBA OFF indicator lamp (IBA system ON)
- Shift the selector lever to "P" position, and then perform the test.






METER LAMP

NOTE:
The test can be performed only when the engine is running.






STOP LAMP






ICC BUZZER






BRAKE ACTUATOR

NOTE:
The test can be performed only when the engine is running.






NOTE:
The test is finished in 10 seconds after starting






Active Pedal

CAUTION:
- Shift the selector lever to "P" position, and then perform the test.
- Never depress the accelerator pedal excessively. (The engine speed may rise unexpectedly when finishing the test.)

NOTE:
- Depress the accelerator pedal to check when performing the test.
- The test can be performed only when the engine is running.






NOTE:
The test is finished in 10 seconds after starting






DCA INDICATOR

NOTE:
The test can be performed only when the engine is running.






LDP BUZZER






WARNING SYSTEM IND






LDP ON IND






LANE DEPARTURE W/L






BSW/BSI WARNING LAMP