Consult-III Function

DIAGNOSIS SYSTEM (HVAC)


CONSULT-III Function

CONSULT-III performs the following functions via CAN communication with A/C auto amp.






NOTE:
Diagnosis should be performed with engine running. Door motor operation speeds become slower and NO results may be returned even for normal operation if battery voltage drops below 12 V during self-diagnosis.

SELF-DIAGNOSIS RESULTS
Testing and Inspection.

DATA MONITOR






ACTIVE TEST






Check each output device





*: With ACCS (advanced climate control system)

NOTE:
Perform the inspection of each output device after starting the engine because the compressor is operated.

WORK SUPPORT





*: With ACCS (advanced climate control system)

NOTE:
When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V or less, the setting of WORK SUPPORT may be cancelled.