Combination Meter Buzzer

COMBINATION METER BUZZER





Component Function Check
1.CHECK FUNCTION
1. Select "INTELLIGENT KEY" of "BCM" using CONSULT-III.
2. Select "INSIDE BUZZER" in "ACTIVE TEST" mode.
3. Touch "Key", "Knob" or "Take Out" to check that it works normally.
Is the inspection result normal?
Yes - Combination meter buzzer is OK.
No - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK COMBINATION METER BUZZER CIRCUIT
Meter Buzzer Circuit.
Is the inspection result normal?
Yes - GO TO 2.
No - Repair or replace the malfunctioning parts.
2.CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- INSPECTION END