Description

HEADLAMP AIMING ADJUSTMENT


description


preparation before adjusting

NOTE:
- for details, refer to the regulations in your own country.
- perform aiming if the vehicle front body has been repaired and/or the headlamp assembly has been replaced.

before performing aiming adjustment, check the following.
- adjust the tire pressure to the specification.
- fill with fuel, engine coolant and each oil.
- maintain the unloaded vehicle condition. (remove luggage from the passenger compartment and the luggage room.)

NOTE:
do not remove the temporary tire, jack and on-vehicle tool.
- wipe out dirt on the headlamp.

CAUTION:
never use organic solvent (thinner, gasoline etc.)
- ride alone on the driver seat.

aiming adjustment screw