Back Door Side

TAIL LAMP CIRCUIT:_:BACK DOOR SIDE





Component Function Check
1.CHECK TAIL LAMP (BODY SIDE) OPERATION
Check that the tail lamp (body side) is turned ON.
Is the inspection result normal?
YES - GO TO 2.
NO - Body Side.
2.CHECK TAIL LAMP (BACK DOOR SIDE) OPERATION
CONSULT-III ACTIVE TEST
1. Select "EXTERNAL LAMPS" of IPDM E/R active test item.
2. With operating the lighting switch, check that the tail lamp (back door side) is turned ON.
TAIL : Tail lamp (back door side) ON
Off : Tail lamp (back door side) OFF
Is the inspection result normal?
YES - Tail lamp (back door side) circuit is normal.
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.CHECK TAIL LAMP (BACK DOOR SIDE) BULB
Check the applicable lamp bulb.
Is the inspection result normal?
YES - GO TO 2.
NO - Replace bulb.
2.CHECK TAIL LAMP (BACK DOOR SIDE) OPEN CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect IPDM E/R connector and tail lamp (back door side) connector.
3. Check continuity between IPDM E/R harness connector and tail lamp (back door side) harness connector.





Is the inspection result normal?
YES - GO TO 3.
NO - Repair or replace harness.
3.CHECK TAIL LAMP (BACK DOOR SIDE) GROUND OPEN CIRCUIT
Check continuity between tail lamp (back door side) harness connector and ground.





Is the inspection result normal?
YES - Check corresponding bulb socket and harness. Repair or replace if necessary.
NO - Repair or replace harness.