Removal And Installation With Distance Control Assist System

ACCELERATOR CONTROL SYSTEM


MODELS WITH DISTANCE CONTROL ASSIST SYSTEM : Removal and Installation


REMOVAL
1. Remove the inside mounting nuts.
2. Remove accelerator pedal assembly.
3. Disconnect accelerator pedal actuator harness connector and accelerator pedal position sensor harness connector.

CAUTION:
- Never disassemble accelerator pedal assembly.
- Never remove accelerator pedal position sensor from accelerator pedal assembly.
- Avoid impact from dropping etc. during handling.
- Be careful to keep accelerator pedal assembly away from water.

INSTALLATION
Installation is the reverse order of removal.