Description

ADDITIONAL SERVICE WHEN REPLACING CAN GATEWAY


Description


BEFORE REPLACEMENT
When replacing CAN gateway, save or print current vehicle specification with CONSULT-III configuration before replacement.

NOTE:
If "READ CONFIGURATION" can not be used, use the "WRITE CONFIGURATION - Manual selection" after replacing CAN gateway.

AFTER REPLACEMENT

CAUTION:
- When replacing CAN gateway, you must perform "WRITE CONFIGURATION" with CONSULT-III.
- Complete the procedure of "WRITE CONFIGURATION" in order.
- If you set incorrect "WRITE CONFIGURATION", incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
- Never perform "WRITE CONFIGURATION" except for new CAN gateway.