Work Procedure

ADDITIONAL SERVICE WHEN REPLACING ECM


Work Procedure

1.PERFORM INITIALIZATION OF IVIS (NATS) SYSTEM AND REGISTRATION OF ALL IVIS (NATS) IGNITION KEY IDS
Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs. Work Procedure.
- GO TO 2.
2.PERFORM VIN REGISTRATION
Perform VIN registration. Work Procedure.
- GO TO 3.
3.PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING
Perform accelerator pedal released position learning. Work Procedure.
- GO TO 4.
4.PERFORM THROTTLE VALVE CLOSED POSITION LEARNING
Perform throttle valve closed position learning. Work Procedure.
- GO TO 5.
5.PERFORM IDLE AIR VOLUME LEARNING
Perform idle air volume learning. Work Procedure.
- END