Transmission Mode Switch: Service and Repair

TOW MODE SWITCH


Removal and Installation


NOTE:
Tow mode switch is integrated in to SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD models) or
4WD switch assembly (4WD models).

REMOVAL
1. Remove console finisher assembly from center console assembly. Removal And Installation.
2. Disconnect SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD models) or 4WD switch assembly (4WD models) harness connector.
3. Press SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD models) or 4WD switch assembly
(4WD models) fixing pawls, and remove SNOW MODE/TOW MODE/VDC OFF switch assembly (2WD models) or 4WD switch assembly (4WD models) from console finisher assembly.

INSTALLATION
Install in the reverse order of removal.