Console Power Socket (Cup Holder)

POWER SOCKET


CONSOLE POWER SOCKET (CUP HOLDER) : Removal and Installation


REMOVAL
1. Remove console finisher assembly. Exploded View.
2. Disconnect power socket connector and remove power socket illumination bulb.





3. Pull out inner socket (1) by pushing the ring pawl (B) from the inner socket hole (square) (C).

A: Hole for power socket (Console finisher assembly)
D : Cut out

4. Remove ring (2) from console finisher assembly while pressing pawls.

INSTALLATION
Install in the reverse order of removal.

NOTE:
Align the cut outs of inner socket, ring and console finisher assembly.