Removal And Installation

POWER SOCKET


CONSOLE POWER SOCKET (REAR) : Removal and Installation


REMOVAL
1. Remove console rear finisher. Exploded View.





2. Disconnect power socket connector (A).

B : Hole for power socket (Console rear finisher)
E : Cut out

3. Pull out inner socket (1) by pushing the ring pawl (C) from the inner socket hole (square) (D).
4. Remove ring (2) from console rear finisher while pressing pawls.

INSTALLATION
Install in the reverse order of removal.

NOTE:
Align the cut outs of inner socket, ring and console rear finisher.