Removal And Installation

POWER SOCKET


FRONT POWER SOCKET : Removal and Installation


REMOVAL
1. Remove cluster lid C lower. Exploded View.





2. Disconnect power socket connector (A).

B: Hole for power socket (Cluster lid C lower)
E : Cut out

3. Pull out inner socket (1) by pushing the ring pawl (C) from the inner socket hole (square) (D).
4. Remove ring (2) from cluster lid C lower while pressing pawls.

INSTALLATION
Install in the reverse order of removal.

NOTE:
Align the cut outs of inner socket, ring and cluster lid C lower.