Ck Susp Indicator Lamp Circuit

CK SUSP INDICATOR LAMP CIRCUIT





Description
Air levelizer control module transmits CK SUSP indicator lamp signal to combination meter via CAN communication, when setting of standard vehicle height is incomplete. Based on the signal, combination meter turns
CK SUSP indicator lamp ON.




Component Function Check
1.CHECK CK SUSP INDICATOR LAMP OPERATION
CONSULT-III
1. Turn ignition switch ON.
2. Select "WARNING LAMP" in "Active Test" in "E-SUS".
3. While operating test item, check that the CK SUSP indicator lamp activates.

ON : CK SUSP indicator lamp turns ON
OFF : CK SUSP indicator lamp turns OFF

Is the inspection result normal?
YES - INSPECTION END
NO - SEE Diagnosis Procedure.




Diagnosis Procedure
1.PERFORM SELF-DIAGNOSIS
CONSULT-III
1. Turn ignition switch ON.
2. Select "Self Diagnostic Result" in "E-SUS".
Are any DTC detected?
YES - Testing and Inspection.
NO - GO TO 2.
2.CHECK COMBINATION METER
Check combination meter. Reading and Clearing Diagnostic Trouble Codes.
Is the inspection result normal?
YES - Replace the air levelizer control module. Removal And Installation.
NO - Repair or replace the combination meter. Removal And Installation.