Scan Tool Testing and Procedures

DIAGNOSIS SYSTEM (TRANSFER CONTROL UNIT)


CONSULT-III Function


FUNCTION
CONSULT-III can display each diagnostic item using the diagnostic test modes as follows.





: The following diagnosis information is erased by erasing.
- DTC

ECU IDENTIFICATION
Transfer control unit part number can be read.

SELF DIAGNOSTIC RESULT
Testing and Inspection.

When "0" is displayed on self-diagnosis result.
- The system is presently malfunctioning.

When except "0" is displayed on self-diagnosis result.
- System malfunction in the past is detected, but the system is presently normal.

NOTE:
Each time when ignition switch is turned OFF to ON, numerical number increases in 1 to 2 to 3...110 to 111.
When the operation number of times exceeds 111, the number do not increase and "111" is displayed until self-diagnosis is erased*.
*: For "U1000" and "U1010", the maximum value is "39".

DATA MONITOR
















WORK SUPPORT





: "LOCK SLEEVE SENSOR" means transfer lock position sensor.